New Original Semiconductor IC Electronic Components IC Chips Electronics Microchip/Atmel Atmega328p Atmega328p-PU, Atmega328p-Pn 8-Bit Microcontrollers in Stock
Basic Info
Model NO. | ATmega328P-PU, ATmega328P-PN |
Transport Package | Tube |
Specification | Lead Free |
Trademark | Microchip |
Origin | Original |
Product Description
Atmel/Microchip ATmega328P ATmega328P-PU, ATmega328P-PN 8-bit ATmega328P-AVR MicrocontrollersIntroductionThe Atmel® picoPower® ATmega328/P is a low-power CMOS 8-bit microcontroller based on the AVR® enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega328/P achieves throughputs close to 1MIPS per MHz. This empowers system designer to optimize the device for power consumption versus processing speed.FeatureHigh Performance, Low Power Atmel®AVR® 8-Bit Microcontroller Family• Advanced RISC Architecture- 131 Powerful Instructions- Most Single Clock Cycle Execution- 32 x 8 General Purpose Working Registers- Fully Static Operation- Up to 20 MIPS Throughput at 20MHz- On-chip 2-cycle Multiplier• High Endurance Non-volatile Memory Segments- 32KBytes of In-System Self-Programmable Flash program Memory- 1KBytes EEPROM- 2KBytes Internal SRAM- Write/Erase Cycles: 10,000 Flash/100,000 EEPROM- Data Retention: 20 years at 85°C/100 years at 25°C(1)- Optional Boot Code Section with Independent Lock Bits• In-System Programming by On-chip Boot Program• True Read-While-Write Operation- Programming Lock for Software Security• Atmel® QTouch® Library Support- Capacitive Touch Buttons, Sliders and Wheels- QTouch and QMatrix® Acquisition- Up to 64 sense channels• Peripheral Features- Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode- One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode- Real Time Counter with Separate Oscillator- Six PWM Channels- 8-channel 10-bit ADC in TQFP and QFN/MLF package• Temperature Measurement- 6-channel 10-bit ADC in PDIP Package• Temperature Measurement- Two Master/Slave SPI Serial Interface- One Programmable Serial USART- One Byte-oriented 2-wire Serial Interface (Philips I2C compatible)- Programmable Watchdog Timer with Separate On-chip Oscillator- One On-chip Analog Comparator- Interrupt and Wake-up on Pin Change• Special Microcontroller Features- Power-on Reset and Programmable Brown-out Detection- Internal Calibrated Oscillator- External and Internal Interrupt Sources- Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, andExtended Standby• I/O and Packages- 23 Programmable I/O Lines- 28-pin PDIP, 32-lead TQFP, 28-pad QFN/MLF and 32-pad QFN/MLF• Operating Voltage:- 1.8 - 5.5V• Temperature Range:- -40°C to 105°C• Speed Grade:- 0 - 4MHz @ 1.8 - 5.5V- 0 - 10MHz @ 2.7 - 5.5V- 0 - 20MHz @ 4.5 - 5.5V• Power Consumption at 1MHz, 1.8V, 25°C- Active Mode: 0.2mA- Power-down Mode: 0.1μA- Power-save Mode: 0.75μA (Including 32kHz RTC)DescriptionThe Atmel AVR® core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in a single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.The ATmega328/P provides the following features: 32Kbytes of In-System Programmable Flash with Read-While-Write capabilities, 1Kbytes EEPROM, 2Kbytes SRAM, 23 general purpose I/O lines, 32 general purpose working registers, Real Time Counter (RTC), three flexible Timer/Counters with compare modes and PWM, 1 serial programmable USARTs , 1 byte-oriented 2-wire Serial Interface (I2C), a 6- channel 10-bit ADC (8 channels in TQFP and QFN/MLF packages) , a programmable Watchdog Timer with internal Oscillator, an SPI serial port, and six software selectable power saving modes. The Idle mode stops the CPU while allowing the SRAM, Timer/Counters, SPI port, and interrupt system to continue functioning. The Power-down mode saves the register contents but freezes the Oscillator, disabling all other chip functions until the next interrupt or hardware reset. In Power-save mode, the asynchronous timer continues to run, allowing the user to maintain a timer base while the rest of the device is sleeping. The ADC Noise Reduction mode stops the CPU and all I/O modules except asynchronous timer and ADC to minimize switching noise during ADC conversions. In Standby mode, the crystal/resonator oscillator is running while the rest of the device is sleeping. This allows very fast start-up combined with low power consumption. In Extended Standby mode, both the main oscillator and the asynchronous timer continue to run.Atmel offers the QTouch® library for embedding capacitive touch buttons, sliders and wheels functionality into AVR microcontrollers. The patented charge-transfer signal acquisition offers robust sensing and includes fully debounced reporting of touch keys and includes Adjacent Key Suppression® (AKS™) technology for unambiguous detection of key events. The easy-to-use QTouch Suite toolchain allows you to explore, develop and debug your own touch applications.The device is manufactured using Atmel's high density non-volatile memory technology. The On-chip ISP Flash allows the program memory to be reprogrammed In-System through an SPI serial interface, by a conventional nonvolatile memory programmer, or by an On-chip Boot program running on the AVR core.The Boot program can use any interface to download the application program in the Application Flash memory. Software in the Boot Flash section will continue to run while the Application Flash section is updated, providing true Read-While-Write operation. By combining an 8-bit RISC CPU with In-System Self-Programmable Flash on a monolithic chip, the Atmel ATmega328/P is a powerful microcontroller that provides a highly flexible and cost effective solution to many embedded control applications.The ATmega328/P is supported with a full suite of program and system development tools including: C Compilers, Macro Assemblers, Program Debugger/Simulators, In-Circuit Emulators, and Evaluation kits.ATMEGA328P-PU
Physical | |
---|---|
Case/Package | PDIP |
Contact Plating | Tin |
Mount | Through Hole |
Number of Pins | 28 |
Technical | |
Core Architecture | AVR |
Data Bus Width | 8 b |
Frequency | 20 MHz |
Interface | 2-Wire, I2C, SPI, UART, USART |
Max Frequency | 20 MHz |
Max Operating Temperature | 85 °C |
Max Supply Voltage | 5.5 V |
Memory Size | 32 kB |
Memory Type | FLASH |
Min Operating Temperature | -40 °C |
Min Supply Voltage | 1.8 V |
Number of ADC Channels | 6 |
Number of I2C Channels | 1 |
Number of I/Os | 23 |
Number of Programmable I/O | 23 |
Number of PWM Channels | 6 |
Number of SPI Channels | 1 |
Number of Timers/Counters | 3 |
Oscillator Type | Internal |
Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
RAM Size | 2 kB |
Schedule B | 8542310000 |
Watchdog Timer | Yes |
Dimensions | |
Height | 3.28 mm |
Length | 37.4 mm |
Width | 6.76 mm |
Compliance | |
Lead Free | Lead Free |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS | Compliant |
ATMEGA328P-PN
Physical | |
---|---|
Case/Package | PDIP |
Contact Plating | Tin |
Mount | Through Hole |
Number of Pins | 28 |
Technical | |
Core Architecture | AVR |
Data Bus Width | 8 b |
Frequency | 20 MHz |
Interface | 2-Wire, I2C, SPI, UART, USART |
Max Frequency | 20 MHz |
Max Operating Temperature | 105 °C |
Max Supply Voltage | 5.5 V |
Memory Size | 32 kB |
Memory Type | FLASH |
Min Operating Temperature | -40 °C |
Min Supply Voltage | 1.8 V |
Number of ADC Channels | 8 |
Number of I/Os | 23 |
Number of Programmable I/O | 23 |
Number of PWM Channels | 6 |
Number of Timers/Counters | 3 |
Oscillator Type | Internal |
Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
RAM Size | 2 kB |
Schedule B | 8542310000, 8542310000|8542310000, 8542310000|8542310000|8542310000, 8542310000|8542310000|8542310000|8542310000 |
Watchdog Timer | Yes |
Dimensions | |
Height | 4.064 mm |
Length | 34.8 mm |
Width | 7.493 mm |
Compliance | |
Lead Free | Lead Free |
REACH SVHC | No SVHC |
RoHS | Compliant |
Notice:
1. As a Diamond Member and an Audited Supplier of Made-in-China since 2014, Telefly guarantees that all the semiconductor chips and other electronic components we provide are 100% new and original, all the chips and components are from formal channels and can be traced back to original manufacturers. 2. All products we provide will be double checked and proper inspection process will be strictly followed before delivery.3. We promise to provide at least 1 year after-sell service for all products we sell.4. Due to the reality of sometime volatile changes of the chips and components' stock and prices, please contact with us for their availability and quoting prices before payment.5. We use DHL, UPS, FedEx, TNT, HONGKONG Post, EUB, EMS or other global express delivery services you designate.
Company Profile
TELEFLY Telecommunications Equipment is a leading Chinese Telecommunications Equipment manufacturer and a semiconductor chip and other electronic component distributor founded in 2004, certified by SGS, CFL Certification Center. We provide high quality and price competitive semiconductor chips and other electronic components, Ethernet switch ,SFP transceiver,media converter ,patch cable, Fiber Optic Splitter and so on. Up till now, our products and solutions have been deployed in over 60 countries and regions, TELEFLY is looking forward to strengthening friendly cooperative relationships with all clients, creating benefits together and sharing the joy of success!
Company Profile
Our Advantages
Why you choose TELEFLY be one of your partner?
1.Customer get satisfied quality and service with competitive price and punctual delivery.
2.OEM service with 13-year experiences, free samples are available.
3.Prompt answer for any question and inquiry in the shortest time.
4.Factory directly,reduce your cost and save time.
FAQ
Q1 . What your MOQ?
A1 .If not specified, 1 pcs is ok,whatever how many you need,and we will also give you the best service.
Q2.What certification did you get?
A2 : Our product strictly operate the ISO9001:2008 quality control system and we passed the CE,FCC,ROHS and SGS test,you can trust us.
Q3 :What about your package and delivery,will it broke during shipping?
A3:You don't need to worry about the package,we will use shockproof case for delivering.
Q4.What your common delivery way?
A4:By air, by sea or express(UPS,DHL,Fedex,TNT,EMS...)We will make a perfect delivery plan for you.